The Top 6 Risk Areas of Work Trucks

The Top 6 Risk Areas of Work Trucks

Find your nearest LINE-X Store.

View Service Information for Automotive

Read more Articles on Automotive

Table of Contents

    Operating a truck fleet is inherently risky. But when you and your employees understand the hazards and know how to confront them, you can create a formula for a safer, more efficient fleet with fewer accidents, fines and breakdowns. Here are six areas and solutions to reduce accidents surrounding work and service trucks.

    RISKS
    1. Neglecting tire and other vehicle maintenance
    2. Unsecured/improperly secured tools and equipment
    3. Slips and falls from the vehicle or in the truck body
    4. Poor truck/trailer connections
    5. Defective braking systems
    6. Inappropriately placed truck-body access points
    1 – NEGLECTING TIRE AND OTHER VEHICLE MAINTENANCE

    Risk: Vehicle upkeep is critical to safety. Tires alone have a huge impact. According to a National Highway Traffic Safety Administration survey, tire issues ranging from under-inflation to blowouts are an underlying factor in 9 percent of crashes.

    Solution: Put vehicles and trailers on manufacturer-recommended preventive maintenance schedules. Train employees to properly conduct pre-trip inspections of vehicles and trailers and promptly notify a supervisor of any defects. A telematics system with onboard engine diagnostics can help you keep track of when preventive maintenance tasks are due, identify problems before they become major and record service details. 

    2 – UNSECURED/IMPROPERLY SECURED TOOLS AND EQUIPMENT

    Risk: If equipment, tools, and materials are not properly secured and covered during transportation, serious incidents can occur. 

    Solution: Make sure employees know how to tie down, secure correctly and/or cover equipment, tools, chemicals, materials and any other cargo. Also, train them to balance and stabilize loads.

    3 – SLIPS AND FALLS FROM THE VEHICLE OR IN THE TRUCK BODY

    Risk: Slips might sound like minor incidents, but they can result in significant injuries, including broken bones, sprains, back injuries and concussions. Maneuvering in and around a work or service truck presents slip hazards, especially in wet conditions.

    Did you know? Falls, slips, and trips accounted for 17% of occupational injuries across industries. – U.S. Bureau of Labor Statistics 

    Solution: Consider adding a spray-on, slip-resistant protective coating such as those offered by LINE-X to your truck beds, coating 4×4 accessories, full vechicle bodies and other surfaces where employees step. Not only will this reduce the risk of slips and falls, but it will guard your investments against corrosion, abrasion and impacts. When spec’ing your trucks, avoid excessively high step-up heights and provide adequate hand grabs to allow the operator to maintain three-point contact while accessing the body or cab. Teach workers not to jump on or off vehicles or trailers. Require them to wear boots or shoes with slip-resistant soles to keep them free of grease, oil and mud. 


    Customer Spotlight: Nichols Fleet Equipment, Chattanooga, TN

    Nick Nichols, Marketing and Communications Manager for Nichols Fleet Equipment, says his company uses LINE-X exclusively and will be spraying it on hundreds of trucks annually. Depending on customer specs, they spray the product on the load bed, front of the truck body (as a rock guard because the front of the body sticks out on the sides), on workbench bumpers, any high-traffic areas and the entire undersides of trucks that work in quarries and mines.

    “OUR CUSTOMERS REALLY LIKE THE DURABILITY OF THE PRODUCT, BUT ALSO THE TEXTURE OF IT BECAUSE IN ADDITION TO PROTECTING THE BEDS OF THE TRUCKS, GUYS WORKING WITH THE TRUCKS, GETTING IN AND OUT OF THEM ALL THE TIME, WON’T SLIP ON IT IF IT GETS A LITTLE WET.” – NICK NICHOLS, MARKETING AND COMMUNICATIONS MANAGER, NICHOLS FLEET EQUIPMENT 


    4 – POOR TRUCK/TRAILER CONNECTIONS

    Risk: Serious accidents have resulted when trucks and trailers weren’t properly connected. If the truck hitch ball isn’t the right size for the trailer, going over a few bumps could cause the two to separate. 

    Solution: Teach employees to check the hitch and ball to make sure they are properly matched and secured. Information on correct hitch size is stamped on the trailer tongue. To ensure a trailer is securely hitched, lift the trailer tongue to see if it remains attached. If the trailer and its cargo are too heavy for this, use a tongue jack. Also connect the trailer and tow vehicle with two safety chains.

    In addition to offering spray-on protective coatings for slip-resistance, LINE-X locations also carry many truck accessories like balls and hitches. LINE-X stores can be a one-stop-shop for fleet vehicle upfit services. 

    5 – DEFECTIVE BRAKING SYSTEMS

    Risk: Lack of maintenance and hot temperatures/roadways can cause brakes to fail, and loss of braking ability is almost certain to lead to an accident.

    Solution: Properly maintain braking systems and replace parts when needed. Train drivers to check brakes often and always do a test stop before getting out on the road. Also teach them to test trailer-breaking systems before towing. Check with your state department of transportation to find out when trailer brakes and breakaway systems (which activate trailer brakes if a trailer disconnects from its tow vehicle) must be used. Most states require these things for trailers over certain gross vehicle weights. Trailer brakes and breakaway systems can keep an unhitched trailer under better control and prevent it from causing the tow vehicle to have an accident. 

    6 – INAPPROPRIATELY PLACED TRUCK-BODY ACCESS POINTS

    Risk: This presents unnecessary safety hazards while also being inefficient.

    Solution: For trucks that will operate primarily in urban areas, spec access points to the rear or curbside of the vehicle to avoid traffic exposure. For vehicles intended for off-road environments, place the primary access point as close to the driver’s compartment as possible so the driver won’t be tempted to access the bed some other (unsafe) way.

    Most service truck accidents can be prevented with well spec’d and well-maintained equipment and concentrated effort to train workers for safety. 

    For more information about LINE-X fleet services, contact us here. Eliminate work truck risks by calling LINE-X today!

    ACT: Canberra

    Canberra, ACT, Australia

    NSW: Emu Plains

    15 Smith Street Emu Plains, NSW, Australia 2750

    NSW: Hunter Valley

    Unit 2, Building B, Lot 2/387, New England Hwy, Rutherford NSW 2320

    NT: Darwin

    1140 McMillans Rd Knuckey Lagoon, NT 0828

    QLD: Geebung

    113 Granite Street Geebung, QLD, 4034 Australia

    SA: Kilburn

    428 Churchill Road Kilburn, SA, 5084 Australia

    SA: Lonsdale

    4/1 Liston Road Lonsdale SA 5160

    VIC: Pakenham

    16 Bormar Dr, Pakenham VIC 3810

    VIC: Somerton

    10 Transport Drive Somerton VIC, 3062 AUS

    WA: Bunbury

    15 Yookson Rd Picton WA 6229 Australia

    WA: Kelmscott

    51-57 Brant Road Kelmscott, WA, 6111 Australia

    WA: Perth

    10 Cowcher Place Belmont WA, 6104

    WA: Wangara

    6B Baretta Road, Wangara WA 6065